Description

Product details of Wireless Water Level Controller

• Type: Wireless Water Level Controller
• Sub Type: Single phase
• Weight: 0.90 KG
• Model Number‏: ‎WWLC-110
• Marketing By: Maxlan Power Technology
• Made In: India
• High-quality ABS Enclosure.
• Supply voltage: 220-270 V AC,
• Suitable for 0.1 HP to 5.0 HP Motor,
• Range / Distance cover: From Ground floor to 5-7th floor (Depending on surroundings)
• No manpower is required as it is operating as fully automatic,
• Also suitable for single-phase MCB starter panels & submersible motor
• Range indication is provided. If the receiver “DATA COM” LED blinks then the transmitter is in the range of the receiver. If the LED glows steadily then the transmitter is out of range of the receiver.
• 1-Year Seller Warranty
• Package Contain : 
• 1 Water Level Controller Transmitter Unit.
• 1 Water Level Controler Receiver Unit
• 6 S S Sensors.
• Product Descriptions: 433 MHZ RF Transmitter & Receiver, 90 meter range.it also works if there is an obstacle between the transmitter and receiver.

  Range indication provided, easy install and understand that both transmitter and receiver are in the range or out of range

  Pair key provided. You can install multiple devices at the same place as a particular transmitter works with the particular receiver by pairing the key.

  High-quality ABS plastic Enclosure.

  Working: This model automatically switches ON and OFF Motors.

  When the water level of the overhead tank becomes low means water gets down from the middle sensor and water is present in the underground tank or sump, the motor gets started automatically. The tank starts filling up. when the water level reaches a higher level, the motor automatically gets switched off.

  AUTO OFF WHEN THE TANK IS FULL OR SUMP IS EMPTY.

  This model has dry run protection so it only starts the motor if water is present in the underground tank or sump.

  Suitable for 0.1 HP to 5.0 HP Motor, Protect motor from dry running.

  Motor ON OFF LED indication provided.

  Water Level indication was provided for both tanks.

  Auto and manual mode indications provided

  Supply voltage: 220-270 V AC,

  Relay: 40 A

  Sensing element: S.S sensor

  Auto and Manual mode switches are available. In auto mode, the motor starts and stops automatically. In manual mode, the user can start and stop the motor by pressing the start and stop button of the controller. No additional wiring is required to operate the motor manually.

  Also Suitable for the MCB Starter panel and submersible motor, see the diagram above for the connection.

  High-quality ABS enclosure provided.

  Fully automatic, controls from the underground tank to the overhead tank so no manpower is required. Long Service Life.

  All signals pass in sensors through the AC filter circuit that improves the life of the sensor,

  Isolated supply provided

  Sensor fault detection is provided, if sensor got failed LED starts blinking

  Electrolysis free design