Description

Product details of Ultrasonic Wireless Water Tank Liquid Depth Level Meter Sensor LED Display Black & White TS-FT002

• Model: TS-FT002
• Color: White & black
• Application: Home use
• Material: ABS
• Screen: LCD Screen
• Humidity range: 20%-95%
• Sensor: 1 Sensor
• Signal receiving Range: 30M building area, 100M open area
• Function: water level, tank temperature, house temperature, Clock, Alarm clock
• Transmission Frequency: 433 MHz
• Transmitter: 6pcs AAA Battery (not included)
• Receiver: 2pcs1.5V AA Battery (not included)
• Style: Wireless Ultrasonic Water Tank Liquid Level Meter
• Warranty: With Warranty-3 Months

  Wireless Ultrasonic Working principle: 

  This ultrasonic Water level gauge will launch data to the sensor as soon as it touches the object, so the requirement of the water tank must be regular, If irregular tanks, the measured data may not be accurate, and the ultrasonic measured data may be your irregular tanks data protruding can data,

  How to Use? 

  a: The maximum depth that the sensor can measure is 15m (49.2ft)

  b: This device can only be used to measure the depth of liquids, such as water, and non-corrosive oil; Can not used in diesel, or petroleum.

  c: This device is not waterproof, Even though it works fine in water splash or dew, this product is not completely waterproof in heavy rain. It is highly
  recommended that a cover be installed above the unit.

   

  How to Assemble? 

  1. The distance between the transmitter bottom and the highest water
  surface should be over 50cm (0.5m or 1.64ft)

  

   

  2. The tank bottom should be FLAT (Irregularly shaped bottoms do not work)

   

  3. Make sure the sensor is installed in the middle and put Flat on the tank.

  

  • Wrong example (1): The sensor is not installed at a level horizontal position.
  • Wrong example (2): The sensor is too close to the TANK wall.
  • Wrong example (3): There are solid objects in the tank.
  • Wrong example (4): The transmitter bottom is dipped in the water (or other liquids
    in the tank) 

  You can check the sensor balance bubble, by checking if the balance bubble is in the red circle middle.

  

   

   

  4) The maximum depth the unit can measure is 15m (49.2ft).

  

   

  5. The radium of the tank may affect the depth measurement, Pls refer to the radium below: