Description

Product details of Mike Automatic Water RS15-9 Bathroom Circulator Pressure Shield Type Cast iron Home Smart Silent Booster Pump 120W 220V AC

• Brand Name: Mike or OEM
• Model Number: RS15-9-120w
• Place of Origin: China
• Horsepower:120W
• Power Source: Electric
• Pressure: High Pressure
• Structure: Single-stage Pump
• Cable Length:1m
• Inlet/Outlet Size:1/2″
• Voltage: AC 220v
• Phase: Single
• Power: 220V50HZ,60HZ
• Maximum lift:10m
• Material: Cast iron
• Usage: The pump’s purpose is to increase tap water’s pressure
• Feature: Long Life, Low Noise, Durable, Energy Saving
• Warranty: 1 Year

• Specifications of Mike Automatic Water RS15-9 Bathroom Circulator Pressure Shield Type Cast iron Home Smart Silent Booster Pump 120W 220V AC

  

  PUMP MODEL	POWER(W)	MAX.FLOW(L/MIN)	MAX.HEAD(M)	INLET/OUTLET(IN)	NW(kg)
  RS15/9	120	30	10	3/4″	2.4
  Materials	Motor	Copper
  	Bearings	Ceramic
  	Rotor can	Stainless Steel
  	Impeller	PP
  	Pump body	Cast iron
  	Shaft	Ceramic
  Fluids	Heating water
  	Heating water
  	Water/glycol mixtures max. mixing ratio 1:1
  Performance	Fluid temprature range	-10℃-+110℃
  	Max. working pressure	10bar
  Power		230V,50Hz
  Ambient temperature		40℃
  Motor	Degree of protection	IP44
  	Insulation class	F
  Mounting positions		pump shaft in the horizontal plane
  Pump Equipment		Screwed end single head pump
  		Manual 3-speed control
  		Non-overloading single-phase motor
  		Cast iron body 130/180mm port-to-port

  

  Product Use:	This pump applies to the circulation and pressurization of cold and hot water below 100 ℃, especially since the shower is easy to catch fire due to the difficulty of water pressure bottom ignition or unstable water pressure. The installation and use of this pump can completely solve the problems, such as low water pressure pressurization water supply for households, solar water heater water supply, boiler hot water circulation pressurization, industrial equipment liquid pressurization cycle, air conditioning, and refrigeration system circulation pressurization.
  Characteristic:	The pump structure uses a stainless steel sleeve to completely shield and isolate the iron core inside the motor from the water, cancels the traditional mechanical seal structure, and completely solves the conventional water seal leakage problem. The structure uses graphite bearing, ceramic or stainless steel rotating shaft, which is wear-resistant, corrosion-resistant, natural water lubrication, low noise, full-head working voltage is not loaded, as long as it is used correctly, the service life is long, and all materials inside the motor are made of high-temperature high-quality materials, It is suitable for the hot water circulation pressurization system. The pump can be equipped with a water control automatic switch, which is more convenient to use. The pump box is designed with a three-speed regulating switch. It can adjust the speed according to the different environments and requirements of users.
  Working Conditions:	1. Transmission medium temperature range: 0 ℃+100 ℃; 2. High ambient temperature:+40 ℃; 3. Medium requirements: clean, free of solid debris, mineral oil, viscosity, and corrosivity; 4. Chemical properties: neutral, non-explosive liquid similar to water (glycol content is 30% higher); 5. Consult the manufacturer before extracting other liquids; 6. Large working pressure: 10bar 7. Small inlet pressure: Temperature is at 50 ℃ 0.05bar The temperature is at 95 ℃ 0.3bar The temperature is at 110 ℃ 1.0bar The above values are only applicable to 300m above sea level, and 0.01 bar is increased at 100m in the higher zone. To prevent noise caused by cavitation, a limited inlet pressure should be maintained. 8. The rated voltage is between – 10% and 10%. If the voltage is too low, it will be particularly slow or unable to start, and the heating will be fast, resulting in low head and low pressure.